Author designs analog synthesizer with Claude Code and prototypes PCB
Understand this story
Developer oidar says he used Claude Code together with Opus 5.5, starting from an empty project folder and a brand-new git repository, to design an MCU-controlled analog synthesizer and complete PCB prototyping. The design includes a Juno-style DCO, a Moog-style transistor ladder filter, and a VCA, and was verified using ngspice simulation. He first had Claude Code refer to the JLCPCB free component list and propose a buildable solution. He says the only hardware fix needed was a solder bridge hand-soldered on the MCU. He also says the process might have been easier if he had chosen a PCB area larger than 10×10 cm.
AI overview based on source reports · Updated 1 hr ago
Coverage timeline
Follow the coverage to explore different perspectives.
- Hacker News AIAgentic AI Designs an Analog Synthesizer
The author used Claude Code with Opus 5.5 to design an MCU-controlled analog synthesizer from a blank project folder, including a Juno-style DCO, a Moog-style transistor ladder filter and a VCA, with circuits simulated in ngspice and a Python behavioral model calibrated against the simulation. The PCB layout required the most human intervention, with two-layer routing failing before a four-layer board fully routed, and the design took 19 hours from first prompt to ordering. After the boards arrived, bring-up was automated via audio loopback and an oscilloscope, SPICE simulations matched the hardware closely, and the only hardware fix was removing a hand-soldered solder bridge on the MCU.
Activity for this story
Not enough continuous observations to show a trend yet.